| |
|
| In the Spot Light |
| |
 |
|
|
|
XGA+Audio Matrix Switcher |
MSY series is a matrix switcher (also known as router, splitter-distributor) that allows combination of any source to be sent to one or more displays that are attached. MSY series matrix switcher is for routing VGA + Audio signal coming from sources like PC Computers, Mac, notebooks, document cameras, scalers, video converters. to displays including Projectors, LCD, Monitors, Plasmas, VGA Recorders and high-end TV. The input and outputs are on HD-15 or D-Sub 15-pin connector along with stereo audio on terminal blocks.
Note: "Available as XGA+Audio matrix switchers in following configurations, please contact us for more information".
| Model No. |
Description |
Input |
Output |
Rack Height |
Weight |
| MSY204 |
4 x 4 VGA-UXGA + Stereo Audio Matrix Switcher |
4 VGA HD-15+Terminal block in |
4 VGA HD-15+Terminal block out |
1U |
4.0 lbs. |
| MSY205 |
8 x 2 VGA-UXGA + Stereo Audio Matrix Switcher |
8 VGA HD-15+Terminal block in |
2 VGA HD-15+Terminal block out |
2U |
8.5 lbs. |
| MSY206 |
8 x 4 VGA-UXGA + Stereo Audio Matrix Switcher |
8 VGA HD-15+Terminal block in |
4 VGA HD-15+Terminal block out |
2U |
8.5 lbs. |
| MSY207 |
8 x 8 VGA-UXGA + Stereo Audio Matrix Switcher |
8 VGA HD-15+Terminal block in |
8 VGA HD-15+Terminal block out |
3U |
10.0 lbs. |
| MSY217 |
16 x 4 VGA-UXGA + Stereo Audio Matrix Switcher |
16 VGA HD-15+Terminal block in |
4 VGA HD-15+Terminal block out |
3U |
10.0 lbs. |
| MSY218 |
16 x 8 VGA-UXGA + Stereo Audio Matrix Switcher |
16 VGA HD-15+Terminal block in |
8 VGA HD-15+Terminal block out |
3U |
10.0 lbs. |
|
|
|
|
| Technical Specifications |
|
| Key Features |
|
| Bandwidth |
250MHz (-3dB) |
| Compatibility |
Up to 1600x1200 (VGA, SVGA, XGA, SXGA, UXGA) |
| Standard output drive |
100 ft @ XGA |
| Switching speed |
200 ns (max) |
| |
| Front / Back Panel Diagrams |
|
| Front panel picture |
| Back panel picture |
| |
| Application Diagram |
|
| Application diagram picture |
| |
| Video |
|
| Video gain |
1.03 dB |
| Return loss in dB |
-30dB@5MHz |
| Differential phase error |
0.03 Deg. |
| Differential gain error |
0.1 |
| |
| Video Input |
|
| Signal type |
Compatible with computer video(VGA - UXGA) |
| Connector type |
15-pin HD Female |
| Impedance |
75 Ohm |
| Nominal level in Vp-p |
0.775 Vp-p |
| Minimum / maximum level in Vp-p |
2.0 Vp-p |
| DC offset |
1.5V |
| |
| Video Output |
|
| Connector type |
15-pin HD Female |
| Impedance |
75 Ohm |
| Nominal level in Vp-p |
0.775 Vp-p |
| Minimum / maximum level in Vp-p |
2.0 Vp-p |
| DC offset |
±5 mV with input at 0 offset |
| |
| Sync |
|
| Sync input impedance in ohms |
1k |
| Sync output impedance in ohms |
1k |
| Input nominal level in Vp-p |
4.5 Vp-p |
| Output nominal level in Vp-p |
4.5 Vp-p |
| |
| Audio |
|
| Audio gain |
0dB |
| Audio frequency response |
20Hz to 20kHz @ ±0.5 dB |
| THD + noise |
< 0.04% @ 1 kHz at nominal level |
| CMRR |
>75dB @ 20Hz to 20kHz |
| Audio S/N ratio |
>90dB @ maximum output (unweighted) |
| Differential phase error |
0.04 Deg. |
| Differential gain error |
±0.1dB channel to channel |
| Crosstalk |
< -65dB@20kHz, < -80dB@1kHz and below 60Hz |
| |
| Audio Input |
|
| Type of audio input |
Balanced or unbalanced stereo audio |
| Connector type |
3.5 mm mini jack |
| Impedance |
>18k Ohm, unbalanced, DC coupled |
| Nominal level in Vp-p |
-10dBV (316mVrms) |
| Minimum / maximum level in Vp-p |
+8dBV, (balanced or unbalanced) @ 1% THD+N |
| |
| Audio Output |
|
| Type of audio output |
Balanced or unbalanced stereo audio |
| Connector type |
3.5 mm mini jack |
| Impedance |
100 Ohm |
| Nominal level in Vp-p |
-2 dBV balanced, -10dBV (316mVrms) unbalanced |
| Minimum / maximum level in Vp-p |
>+10 dBm, balanced; >+4 dBV, unbalanced @ 1% THD+N |
| |
| Control |
|
| Front panel |
Switching manually control by front panel. |
| RS-232 control |
ASCII protocol via DB-9 connector |
| Remote |
IR remote control included |
| LAN control |
Yes (with optional accessory) |
| Control software |
Switcher 2.0 |
| |
| General |
|
| LCD display |
2 Line, monochrome on front panel |
| Power supply |
Built-in enclosure with IEC inlet |
| Input voltage |
110 - 240 VAC (50/60 Hz) |
| Power consumption |
20 Watts |
| Storage temperature |
-40° to +70°C |
| Operating temperature |
0° to +50°C |
| Mounting |
Rack Mountable (Standard) |
| Enclosure type |
Painted Aluminium metal |
| MTBF(Mean Time Between Failure) |
30,000 Hours |
| Warranty |
3 year parts and labor |
| Included in package |
Product, power cord, user guide, remote control, RS-232 cable |
|
| Market Application |
| A2V Gear’s products can be used in any AV system integration project or dynamic digital signage / narrowcasting or info-communication projects or installations world-wide. A2V Gear equipments are used in corporate, business / offices, education (schools, colleges, universities, private), retail stores, supermarkets, transportation (airports, train-station, bus-stations, ferry-stands), banks and other financial institutions, hospitality (hotel, restaurants, fast-food joints, bars, clubs), healthcare (hospitals, clinics, doctor/dentist office), churches, temples, government buildings, multi-story buildings, large facilities, industrial/manufacturing plants, theaters, sports complexes, control center and many more venues and locations |
|
|
